Image module

SWX-ZA-JXD4

Explosion Proof Cable Junction Box
  • Stainless steel 304
  • IP68, dust tight, protect against continuous immersion in water
  • With G3/4, threaded holes for cable connection
  • It’s applicable for temperature -25°C-60°C
  • Installation in outdoor, petrochemical, high corrosive environment.
  • CNEX certificate No: CNEx 16.1481

Spesifikasi

Model SWX-ZA-JXD4
Atmospheric pressure 80KPa~106Kpa
Ambinet temperature -25°C ~ 60°C (-13°F to 140 °F)
Relative Humidity ≤95% (+25°C)
Certifications ExdⅡCT6, Gb/ Ex t D A21 IP68 T80℃
Ingress Protection IP68
Package dimension  LxWxH Φ187*84mm
Net weight 3.5KG
Material SUS304/ SUS316L
Max voltage AC220V
Max electrical current 21A
Number of Threaded holes 4 holes
threaded hole G3/4
Pressed screwed nut SUS304
Water proof ring yes
Inner blocks 6* Terminal blocks
Image module

Fitur SWX-ZA-JXD4

Explosion Proof Cable Junction Box SWX-ZA-JXD4 dirancang, diproduksi serta diuji sesuai dengan standar GB3836.2-2000 peralatan listrik yang tahan ledak dalam lingkungan berbahaya.

  • Stainless steel 304
  • IP68, dust tight, protect against continuous immersion in water
  • With G3/4, threaded holes for cable connection
  • It’s applicable for temperature -25°C-60°C (-13°F to 140 °F)
  • Installation in outdoor, petrochemical, high corrosive environment.
  • CNEX certificate No: CNEx 16.1481

Explosion proof camera designed to meet the rigorous requirements for hazardous locations with integrated CCTV Camera for safe and efficient installation. Explosion proof camera provides the image quality, performance and reliability you demand in the most challenging environments. To maintain health and safety, explosion-protected cameras and their accessories are required for video surveillance in hazardous areas.

In general, explosion-proof camera and enclosure prevent ignition or sparks from igniting the gas or dust in the environment. This can be done in two ways, the housing can be strong enough to prevent any internal explosion from getting outside the enclosure, or it can contain inert gases that prevent the explosive gases from entering the enclosure, and causing an internal explosion.

The specifications define certain types of environments, such as areas where combustible gases are present all the time, some of the time or where it is unlikely to be there at all. The specifications also describe the type of combustible material that can be present. Different materials are defined by how easily an explosion can be triggered and how much energy is released by the explosion. For example, acetylene and hydrogen have a low flash-point, so are very likely to explode and cause damage.

Brochure

.jpg
Image module